Front track shock resi spacing for additional wheel kits

If the front shock reservoir is in the way of mounting your outer bogie wheel kit (most '11's and up) all you need to do is space it over. We used two longer bolts and two 3/8" wide nuts. See pictures below. Space it over far enough so that no part of the bogie wheel bolt will hit the resi. You can add washers under the head of the long center bolt next to the head of the bolt and before adding the large spring washer if necessary to achieve good clearance. 

2011	2011
Place 3 washers between the rail and each resi. bracket 2014	Another view from underneath shock 2014	Place 2 washers on the bolt before the large spring washer so the bolt end will clear the resi.	Your clearance should be around 1/8" between the bolt end and resi.

Back to the Polaris IQ parts and accessories page