Free Shipping $49+ USA Only  (Details)

319-364-1120

⇑ Select your sport ⇑

Polaris IQ Racer Suspension Parts 
Shock service is available with fast turnaround. Email us for more details.

front_shock_springs_small Front shock springs $186 a pair ('05 & '06 came stock with a 170# that was just too stiff. The '07 & '08's are using the 150#. The 600RR is using 130#. For '14 and up call us, they require different springs.
Size and Color
front_shock_springs_small Front shock springs for 2" body IFS shocks $260 a pair
For use on '15-17 with 2.25" id springs 12" long. White powder coat finish.
These are special order, no cancellations or returns.
Size and Color
front_shock_springs_small Comming Soon
Front shock springs for 2" body IFS shocks on '18's $$$
a pair
For use on '18 with 2.25" id springs 10" long. White powder coat finish.
These are special order, no cancellations or returns.
Size and Color  
140# Front track shock spring for '05, '12 and '13's $38 each (most models came stock with a 160# that was a bit stiff for most)
Size and Color
130/270# Front track shock spring, Stock on the 11's $62
not actual picture
Size and Color
shock-spring-retainer_small Spring Retainer Ring  $39.99ea
Fits most Polaris Walker Evans shocks with spring ID of  1 13/16"
Normally used on IFS and front track springs.
 
Spring Retainer Ring that works with o-rings on shock eyelets  $48ea
Fits most Polaris Walker Evans shocks with spring ID of  1 13/16"
Normally used on '08-'14 IFS and some front track springs.
 
Walker Evans trail friendly shim stacks with piston $75.00ea These are close to the 600RR valving with a little extra softness on the top end. Sold each so choose 4 to do a complete sled. note: '06-10  front track shock should run 45cc of 5wt oil at 150 psi-no new stack or piston is required. The newer needle shocks take separate set ups also offered in the drop down menu.  All shim stacks are non refundable. For '14 and up call us, they require different springs too.
Year and placement
polaris_torsion_spring_small Torsion Springs $107 each  These are the superseded/improved springs
Year and Side
Titanium Torsion Springs $780 a pair with free shipping
19"/6" Lighter and stronger than stock springs and last way longer.
Recommended by the Polaris race dept. and the same springs Levi LaVallee runs. They are slightly thicker than the stock steel ones so some modification to plastic mounting parts will be required.  We recommend 15"lb/deg torsion spings at 98 degrees preload for a 180lbs rider. 20"lb/deg are sold out for the 16/17 season
Select
polaris-iqr-front-torque-arm_small Front Torque Arm $250
Part #1
Year
rear_torque_arm_asm_arm_small Rear Torque Arm ASM. Arm $190
Part #15 and including both #10's fits all IQ race sleds
Year
rear_torque_arm_asm_arm_small
not actual picture
Rear Torque Arm ASM. Arm $65
Part #15 and including both #10's fits all IQ race sleds
Year
Powermadd Shock covers $20.00pr
Fits all Polaris IQ race sleds + 600RR.  Installs in minutes.  
Outerwears Shockwears
standard shock covers $31.50pr
Click here for a full page view

(intended use-Polaris IQ race sleds and 600RR)
Color
Outerwears Shockwears
printed shock covers $41.90pr
Click here for a full page view
(intended use-Polaris IQ race sleds and 600RR)
Color
polaris_spindle_plug_small
Polaris spindle plugs $4pr
Fits 05-08 Polaris IQ race sleds + 600RR.   
Polaris IQ racer lower A arm OEM chrome finished bushing/bearing $196.55ea
Fits 05-08 Polaris IQ race sleds + 600RR.   
iqr-lower-a-arm-bearing_small
Aftermarket IQ racer lower A arm bushing/bearing $50ea
Bearings come with a hole in the outer race for lubing. You will have to reuse your stock inner brass inserts. They can easily be pressed out. 
Fits 05-08 Polaris IQ race sleds + 600RR.   
Video: How to check your bushings

grease-zerk-a-arm_smallgrease-zerk-fitting_small

Grease Zerk for IQ racer lower A arm bushing/bearing $7.20 a pair
3/16" Tap in fitting.
Fits 05-08 Polaris IQ race sleds + 600RR.   


wheelkits_small1
Click to enlarge

5.62" Outer wheel kit with your choice of color (Includes 1ea of # 29-34) $54each (red is $10 additional)
We recommend adding 4 extra outer bogie wheels for trail riding. This kit has one 5.62" wheel with a 6205 or 6004 bearing for use with stock IQ/Garland profile 24 Hyfax (standard). Note: Some wheels may come with plastic spacers that will need to be tapped out prior to installation.
Color

1 Outer bogie wheel and 1 mount-no hardware (Includes 1ea of # 32 & 33) $39 (red is $10 additional)

Color

washer-spacer-kit-outer-wheel_small
Mounting Pictures

'11-current spacer washers for use with 1, 5.62" outer wheel kit $3.20 Spaces over front track shock reservoir. You only need 1 kit per sled. Use 3 between resi and rail on both bolts and 2 on the long top bolt on the outside before the spring washer and wheel.
sly-dog-real-cool-wheels_small

NEW Real Cool 5.63" wheels $89.95pr (1 left, 1 right)
New technology, like a fan, when mounted correctly they pull snow into the suspension for better lubrication and cooling. Could also be used to pull snow out. Wheels come with 6004 bearings.

Color
sly-dog-real-cool-wheels_small
NEW Real Cool 5.63" outer wheel kit $135pr (1 left, 1 right)
This kit will comes with 2 wheels, 2 mounts and all the regular hardware.
New technology, like a fan, when mounted correctly they pull snow into the suspension for better lubrication and cooling. Could also be used to pull snow out. Wheels come with 6004 bearings.
Color
inner_bogie_wheel_small
5.62" inner wheel kits with spacers $72.00pr 
We recommend one pair of these to protect your stock IQ or Garland profile 24 hyfax and front track shock. We recommend adding these wheels first. These inner wheels have a hole drilled into them so that you can easily remove your front track shock bolt. May not work on the 2011 and newer without changing the shock reservoir and hose connectors.

Rear Idler Wheels 6.38 with 6004 standard bearing $32ea

Available in solid black, red swirl, yellow swirl or blue swirl.
Color
hyfax_small
Aftermarket Colored stock IQ Profile 24 Hifax,
Black or White $64pr, Colors $78pr
 
All colors 64" long except white, 61"
(
needs cut to length, will fit most long tracks) Same profile as stock Hifax. For use with stock 5.62" wheels
Color

 Many more parts available including all stock/OEM Polaris parts
Please Contact us
Find us on Facebook
Visit our YouTube channel