Jet Ski Starters & Solenoids
Most items are in stock however this is not live inventory

Also works on Krash Jet Skis

NOTE: HIGH TORQUE
DETAILS: HIGH TORQUE MADE TO EXCEED THAT OF O.E. , DOUBLE SEALED COLLAR, HEAVY DUTY ARMATURES WITH 4 BRUSH SETS, FULL 2 YEAR WARRANTY
Note: The middle terminal where the ground goes needs ground to bare metal and will need a smaller bolt than what comes stock on some machaines like the Krash Jet Skis.

New Starter
Starters are manufactured to meet or exceed OEM specifications
Insulated armature for rust and corrosion protection
Rubber seals on top and bottom side of unit-ensures dry operation for longer life
90/10 copper bushings for a longer life
1 year warranty

Affordable starters are constructed with longer-life bearings than OEM
Many OEM starter motors have an unprotected output needle bearing on the outside of the output shaft's seal; moisture can and does enter the output cap of the electric motor and follows the armature shaft to the unprotected output needle bearing, which corrodes the bearing
Rick's takes the extra step of installing a double-sealed ball bearing, with the output shaft seal on the outside of the bearing in their new aftermarket unit
This simple application of common-sense engineering does two things: first, the outside bearing is now protected from damaging water entry, and second, the sealed ball bearing is replaceable.
One year replacement warranty through Ricks only.

New starters
Inexpensive alternative to OEM replacement

Longer bolts and extra washers and you must measure the available depth and add washer according to that and leave some space, a few threads, for the bolts to tighten in. Failure to do this can cause permanent engine damage.
See our starter installation tips video on you tube.

OEM quality replacement parts

Also works on Krash Jet Skis.
You may need a flywheel puller to install this bendix-sold below

Also works on Krash Jet Skis.
You may need a flywheel puller to install this bendix-sold below

OEM quality replacement parts.
You may need a flywheel puller to install this bendix-sold below

OEM quality replacement parts.
You may need a flywheel puller to install this bendix-sold below