Free Shipping $99+

action="https://www.paypal.com/cgi-bin/webscr" method="post">
USA Only  (Details)

319-364-1120

⇑ Select your sport ⇑

RSI Snowmobile Handlebar Riser Blocks

We also sell risers from - POWERMADD,  SPORTECH, FLY  &  SPI
RSI Handlebar Risers. RSI makes one of the most diversified pivoting handle bar riser block systems available.
RSI and Fly products are very similar and interchangeable.
    rsi_risers_small

rsi_logo



rsi_inserts_small
Top inserts fit 7/8" standard bars or remove to fit
1 1/8" fatty bars

RSI Pivoting Handlebar Risers $84.95 - $89.95
Dual pivoting adjustability allows you to position handlebars where you want them.
Available in  2", 3", 4", 5", 6", 7", 8",  9" and 10" heights.
Each pair of risers Comes with custom inserts that allows risers to fit stock 7/8" handlebars and oversize 1 1/8" handlebars.
6061 T-6 Aircraft aluminum
For use with pivot style steering posts or steering posts with adapter tubes.
Anodized finish in black.
Note: Double check length of cables and brake lines for proper fit. Extended length cables or brake lines may be required for proper operation.
If sizes are sold out see ROX
Select

rsi-steering-post-pivot-adaptor_small

RSI steering post pivot adaptor $34.95
Converts stock flat style steering post to a pivot style steering post when using a pivoting style handlebar riser.
Super strong 6061 T-6 Billet Aluminum construction.
Simple design bolts onto stock flat plate style steering post.(except Arctic Cat telescoping post)
Works on RSI pivoting style risers and other 2 piece pivoting style risers.
Adds 1 of rise.
Black finish.
Note: Double check handlebar clamping surface width to verify riser/pivot adapter combination fits correctly.
Select   
 rsi_handlebar_pad_white_smallrsi_handlebar_pad_black_small
rsi_handlebar_pad_blue_small
rsi  handlebar pad
RSI Snowmobile Handlebar Pads $29.95
Designed specifically for snowmobiles.
Heavy duty outer nylon with TPR rubber logos will not
separate or crack in the coldest weather.
Large size fits most aftermarket and factory handlebars and risers.
Color 
 
 

RSI Phone Bar Pads $59.95
Designed specifically for snowmobiles.
Displays your phone inside a weather resistant bar pad
Large size fits most aftermarket and factory handlebars and risers.
Foam can easily be cut to fit.
Color  
 
 
RSI Angled Handlebar Risers $69.95
30 DEGREE FITS: All Polaris (Except 2009'), Ski-Doo Rev and ZX Chassis, All Arctic Cat (Except M-Series Chassis), Yamaha Mtn Max, SX, SRX, Viper
15 DEGREE FITS: ALL Arctic Cat M-Series and Crossfire Chassis and 2009' IQ Polaris with flat style steering posts.
Select 
 
RSI extended brake lines RSI extended brake lines $59.95
6" longer than stock length brake lines.
Teflon line and stainless steel braided hose with a clear UV protected covering
Swivel fittings on non banjo lines
Select

 
RSI extended length throttle cables RSI extended length throttle cables $69.95
8" longer than stock. This is a complete throttle cable replacement. You may only need the throttle cable extension kit below.
Call for sled model availability.

PowerMadd Throttle Cable extension kit  $35
note: will not fit '07-'08 Arctic Cat F series

Option

 
Race Red
Dark Blue
Black

Sky Blue
Silver
Red
Purple
Bronze
RSI Hustler 7/8" aluminum snowmobile handlebars $120
Super-strong 7/8" walled aluminum flexes to reduce vibration and rider fatigue
7/8" clamp area does not require oversized risers or a clamp kit
Mandrel precision pre-bent hook on each end of the handlebar
Compatible with stock controls and grips
1" rise, 30" wide, 10 sweep
Include black RSI custom 3D-molded bar pad
Select

Click on picture to enlarge for more details

RSI 7/8" chromoly snowmobile handlebars $79.95
15 degree is no longer available
Style

Click on picture to enlarge for more details

 rsi-chromoly-handlebars RSI 7/8" chromoly rider snowmobile handlebars $79.95
7/8" Chromoly steel construction
10 Degree pullback
29 1/2" wide
Available in  4"
Custom cut to width guide marks for narrowing bars to rider preference
Accepts RSI handlebar hooks and OEM handlebar hooks
Black finish
Style
rsi-tapered-handlebars_small RSI Tapered Aluminum snowmobile handlebars $79.95
1 1/8" fatty bars
Style

Sno X Mountain bar $79.95
Style

Backcountry bend is on back order-see the FLY Aero Tapered Mini bars instead.

Click on picture to enlarge for more details

rsi-handlebar-hooks-aluminum-stubrsi-handlebar-hooks-aluminum-long
For Aluminum

rsi-handlebar-hooks-steel-stubrsi-handlebar-hooks-steel-long
For Steel

RSI bar end hooks $21.95ea
Easy bolt on design.
Extends handlebar for a more comfortable feel when leaning off of snowmobile.
The narrow shank ones fits RSI aluminum handlebars as well as many other brands.
The wider shank ones fits RSI steel handlebars as well as many other brands.
Allows extended length grips to be installed over the top for a seamless feel.
7/8" Outside diameter is same size as handlebar diameter for a even seam.
Available in a short Stub length as well as Long length.
Style

 

rsi-grips-7
 
RSI black Rubber Grips 7" $27.95pr (our favorite)
One piece 7" rubber grip.
Ultra diamond grip surface is soft and comfortable.
NEW durable rubber compound lasts longer.
Compatible with hand warmers.
Fits over RSI Tapered and steel handlebar hooks as well as other handlebars that have pre bent hooks.
Thinner rubber design provides a smaller round feel when installed onto the handlebar. Great for people who want that smaller feel or for people with smaller hands.
Can be cut down for custom lengths.
Works great on stock handlebars or handlebars with short style hooks.
We reccomend installing grips with our RSI Grip Stay Grip Adhesive for best results.
NOTE: These 7" long grips will not be long enough if running a RSI long bar hook or when useing hanldebars with pre bent long/90 degree hooks. For these longer hook applications the RSI 8" rubber grips or RSI Grip Wrap grips work better.
Style

 

rsi-grips_small8" RSI black Rubber Grips 8" $27.95pr
One piece 8" rubber grips manufactured by ODI. RSI is the original designer of these 8" long rubber grips.
Nice diamond grip surface
Compatible with hand warmers
Fits over RSI Tapered and steel handlebar hooks as well as other handlebars that have pre bent hooks.
We recommend installing grips with our RSI Grip Stay Grip Adhesive for the best results.
Available in Standard Compound or Tacky Compound
"New" Tacky Compound is very tacky and offers a soft cushy feel. Exclusively available through RSI only. Note: Tacky compound will wear out faster than the Standard Compound Grips. ""You can NOT use safety wire with the Tacky Grips.""
Style

 

rsi-handlebar-hooks-aluminum-stub
For Aluminum

rsi-handlebar-hooks-steel-stub
For Steel
rsi-grips-7
Handlebar Hook Kit with Grips $68
Kits contain a pair of stub hooks and a pair of 7" grips
Hooks extends handlebar for a more comfortable feel when leaning off of snowmobile for technical riding
7/8" outside dimension of the hook is same size as handlebar and allows extended length grips to be installed over the top for a seamless feel
Made in the U.S.A.
Choose for steel or Aluminum handlebars:
Select

 

rsi-4-inch-grip-heaters_smallrsi-extended-grip-heaters_smallrsi-extended-grip-heaters-2_small HI POWER GRIP HEATER ELEMENTS
RSI handlebar heaters 4"
& 5 3/8"extended $65pr
Style

Hi power grip heater elements.
A must when using aluminum handlebars to keep grips hot.
3 Wire high/low applications. Also works on Polaris models with low/medium/high switches.
Universal design works on all 12 volt snowmobiles.
3M self adhesive backing for easy installation onto handlebars.
Extended hook design shape and standard rectangular shape design.
Extended hook design extends over the hook of the bar to heat the hook portion of the handlebar as well as the flat hand area.
Sold per pair.

rsi-throttle-block_small
Fitments:
Arctic Cat: M-Series, Pro Climb, Pro Cross [2-stroke only]
Polaris: All Polaris machines 1990-2017'
Ski-Doo: XP/XM/XS Chassis (2-stroke only)
POLARIS BILLET THROTTLE BLOCK $109.95
Billet aluminum Replacement throttle block assembly is smaller than stock.
Revolutionary slim design opens up much need handlebar space for clamping on accessories like Handguards, Mountain Bars, GPS etc.
Utilizes the stock throttle lever pivot pin safety switch (EFI Models Only, Carb models eliminate safety switch) and stock push button stop switch.
Relocates the stock stop switch to the front of throttle block to prevent accidental deployment of stop switch.
Simple 2 piece bolt on construction Uses stock throttle lever.
Anodized black with laser logos.
   
   
   

Before
without snowmbile neck cover

After
with snowmbile neck cover

Click here to purchase a Snowmobile Neck Cover or Snowmobile Neck Gaiter to cover up
your wires and cables and fill in the void.

Click here to see a step by step installation of two different styles of bar riser systems

Find us on Facebook
Visit our YouTube channel