Krash Jet Ski Parts, Accessories, Upgrades and Tech Support
Most items are in stock however this is not live inventory

We like to change out the finger throttle and trim levers to Slippery or RRP which we find are more comfortable and the Slippery ones are closer to the bars so less finger fatigue, at least on the throttle side. We like to add a bilge switch either under the handlebar start stop switch for pre '21 models (can only be done with aftermarket Slippery or RRP levers, maybe others too as they give the clearance necessary). or on the front of the tray with a watt hole mount. Another option is a scupper valve, versa plug or duckbill for water draining. We add a pole saver rope especially for those doing flips or jumping waves. We will be adding to this page as we find out what fits so check back often.

RRP Fat Handlebars $59-$69

Rickter RRP Fat Handlebars
They are 1 1/8" in center and standard 7/8" the rest of the bar. All standard throttles, trim levers and grips fit like normal.
The Riser or set back bar is 50mm or about 2"
Works on all Krash Stand up models.
Will work on Reaper with 1/8" adaptors sold separately below

4* Fat Bars

Straight Phat Bars

Straight Phat V bars

Blowsion Phat/Fat Handlebars $66-$91
Will not be available until spring of '23 but you can still preorder.

Blowsion Kommand Phat Handlebars
They are 1 1/8" in center and standard 7/8" the rest of the bar. All standard throttles, trim levers and grips fit like normal.
Phat V bars give 2.5" of rise or setback
Works on all Krash Stand up models.
Will work on Reaper with 1/8" adaptors sold separately below

Reaper Handlebar Adaptors $34.95

Reaper handle bar adaptors
For use with 1 1/8" Fatty bars, set of 4 shims
Special order only, takes about a week for us to get, no returns.

Slippery Finger Throttle / Trim Lever $83.67
6mm adaptor required for both sides. (sold below)

Slippery throttle levers can also be used as a trim lever. 6mm adaptor required for both sides. (sold below)

Designed to clear grip to allow mounting to bar grips and hands
Precision cnc machined from billet aluminum stock
Contours around index finger
Three cable throw positions
Nylon cable support roller
Nylon bushing and thrust washers

Note: 2020+ models with 2mm trim cable will require you to dremmel or mill the slots slightly bigger to work. Same thing for the cable adaptor. So far this is not required for the 2021 1200's with pulley system.

Jet Ski & Waverrunner Finger Throttle Lever $80.95
Kawasaki, Yamaha and Krash all require adaptors sold separately below.

PJS throttle levers

Designed to clear grip to allow mounting to bar grips and hands
Precision cnc machined from billet aluminum stock
Contours around index finger
Three cable throw positions
Nylon cable support roller
Nylon bushing and thrust washers
10mm threads for throttle hook up.

Throttle Cable Adaptors $12.95

Throttle Cable Adaptors
For Krash cables to aftermarket 10mm finger throttles and trim levers.
The slot is about 1.5mm. If you have 2mm cables you will need to dremmel out the slot.

Soft Throttle Spring $21.95ea

Soft Throttle Spring
For Mikuni carbs, Also works on Krash carbs and other carbs based off a Mikuni design. Has 25% less tension than stock. Reduces throttle fatigue. Good/Lubricated throttle cable required.

Motion Pro Cable Luber V3 $24.99ea
Works with cable nuts and adjusters. Our Favorite

Motion Pro Cable Luber V3
Makes it easy for you to efficiently lube control cables without the mess
Unique design features an innovative seal and adjustable plunger to ensure proper lubrication with less lube
Works on most control cables with 4 mm to 8 mm O.D. housing
Will seal over most free spinning end fittings
Can be used with compressed air to blow out dust and debris prior to lubing
Easy to use and clean
For best results we recommend using Motion Pro Cable Lube Part No. 15-0002 (sold separately)
Patented design

Motion Pro Cable Lube $18ea

Motion Pro Cable Lube
Special blend of Red Line� synthetic lubricants and rust inhibitors keeps your cables working smoothly in any weather condition from hot to cold, wet or dry
Ideal for use with Motion Pro cable luber
Depending on riding conditions, it's recommended to lube your cables between rides or after every other ride

PROTECT ALL Cable Life Lubricant $9.99ea

PROTECT ALL Cable Life Lubricant
Cable Life Minus 70� lubricant is specially formulated to stay fluid to -70�F
Ideal for lubricating cables on motorcycles, PWCs, snowmobiles and other vehicles
Lubricates and rustproofs all moving parts
Depending on riding conditions, it's recommended to lube your cables between rides or after every other ride

Krash Trim Assist Bracket $40
Please read the notes to the right

Krash Trim Assist Bracket
Reduces the amount of pull required to use the trim. Comes with a mounting bolt. Fits all stand up models so far. May not fit Reapers. Were checking on this. There appears to be a top of the bracket clearance issue. We will see about cutting it down and having one specifically for the reaper. Will not work on 2021 with the pulley system.

Krash 2021 Pulley Trim System $599

Krash 2021 Pulley Trim System
All the parts you need to upgrade your old system to the new easy pull pulley trim system. You will need your own drill, drill bit and tap for the trim nozzle.

Blowsion Jet Ski Handlepole Extension Limiting Rope $59.95

Jet Ski Handlepole Extension Limiting Rope
The design of the Blowsion pole limiting rope is to STOP your pole from extending approx 2-3" from total max extension. This prevents the forward motion of the pole and riders body from destroying expensive handlepoles, pole brackets, hulls and also expensive human body parts! A spring back retention cord attaches to the bottom of the pole spring area and will also pull the pole back down if you become separated from your ski in surf or large lake waves. All stainless mounting hardware and instructions included. Fits all stand up Yamaha FX1, all years Yamaha Super Jet, Polaris Octane, Kawasaki SXR 800, 750 SX, and 650 SX. A must for ocean or big wave riders.