Krash Jet Ski Hull Parts & Accessories
|
|||||
 Krash Tie Down Loop $3.95 |
Krash Tie Down Loop
Stainless Steel. |
||||
Blowsion Jet Ski Handlepole Extension Limiting Rope $59.95 |
Jet Ski Handlepole Extension Limiting Rope The design of the Blowsion pole limiting rope is to STOP your pole from extending approx 2-3" from total max extension. This prevents the forward motion of the pole and riders body from destroying expensive handlepoles, pole brackets, hulls and also expensive human body parts! A spring back retention cord attaches to the bottom of the pole spring area and will also pull the pole back down if you become separated from your ski in surf or large lake waves. All stainless mounting hardware and instructions included. Fits all stand up Yamaha FX1, all years Yamaha Super Jet, Polaris Octane, Kawasaki SXR 800, 750 SX, and 650 SX. A must for ocean or big wave riders. |
||||
Krash Hood Latch $49.95ea |
Krash Hood Latch Sold each These OEM flush mount hood pin kits are lightweight, high strength, glass-reinforced thermoplastic housings that contain a hinged, spring-loaded stainless steel pin. The stainless steel pin engages with the included aluminum hood pin for a secure fit. Hardware included. |
||||
Krash Ratchet Strap Assembly $55.95-$65.95ea |
Krash Ratchet Strap Assembly Sold each Straps and ratchet only The Reapers one is special order only, No cancellations or returns. This works on the 50 cal, the Footrocket and Predator. It is not for the Predator RR. |
||||
See notes in Red to the right |
Versiplug/Vacate Valve Drain Kit System for 2021+ Hulls with the 4
bolt drain plug. This kit will include all the parts necessary to get a 1" drain system in place including the valve. It will also contain a plug should you choose to block it all off. You will have to drill 1 center hole and 2 mounting holes for the housing. See our video on Youtube on how to remove the stock plug. Do not over tighten the metal Versiplug/Vacate valve in the plastic threads. |
||||
See notes in Red to the right |
Versiplug Drain Screws in where the rear factory drain plug is (once removed) Actual threads measure 18.95mm od (stock plugs are 19.5mm od) Do not over tighten the metal Versiplug in the plastic threads. Teflon tape is recommended. We highly recommend ordering an extra threaded plug housing below. The threads are better on these aftermarket housings. For 2021's you will need a drain plug housing for the plug and the stock plate will need to be drilled out. Diameter is about 1" |
||||
See notes in Red to the right |
Blowsion Vacate Valve Drain Screws in where the rear factory drain plug is (once removed) Actual threads measure 18.85mm od (stock plugs are 19.5mm od) Do not over tighten Vacate Valve in the plastic threads. Teflon tape is recommended. We highly recommend ordering an extra threaded plug housing below. The threads are better on these aftermarket housings. For 2021's you will need a drain plug housing for the plug and the stock plate will need to be drilled out. Diameter is about 1" ID of the actual hole inside is roughly 3/8" |
||||
|
Replacement drain plug housing The small plug housing is held on with nylock nuts on the back side. You will need to remove the 3 small screws on the top of the rear cover and the rivet on the lower right corner on some models to remove the big plug. You may have to pry it out with a large screwdriver. | ||||
Read the notes to the right. |
Large Versiplug Drain System for Krash hulls This Versiplug is a snug fit already but will require glue or sealant like 3m 4200 to secure it in the back of the hull. For older models that drain in the pump area: It will require modification to fit in the pump area based on pump clearance. Diameter of portion inserted in to tube is 2" Length is 1.75 overall. Will not work on 2021 1200 with the 4 bolt scupper cover. See below for one that will work. |
||||
|
Large Krash 35mm Vacate Valve for 2021+ Hulls This will move a lot of water out of the hull very quickly while your riding. This has a 35mm hole. This is not a full proof seal and needs to be kept clean. Video is here |
||||
|
Krash Intake Grate Fits 19+. All others will need to be ordered. They usually take 1 to 3 weeks to arrive but can sometimes take longer If you need a rideplate for a different model please contact us |
||||
Read the notes to the right. |
Krash Ride Plate Holes are not predrilled. We only stock the 2 most popular in black. All others will need to be ordered. They usually take 1 to 3 weeks to arrive but can sometimes take longer If you need a rideplate for a different model please contact us. 2020 and older Footrocket and all FR Pros measure 11" in length. |
||||
Sold each/all separate parts |
Krash Ride Plate bolts and washers sold each |
||||
|
Aftermarket Hood Seal Heavy-duty replacement Hood Seal Fits all years Yamaha Super Jet, Yamaha FX-1, all years Polaris Octane, Yamaha Wave Blaster and most aftermarket hulls like Krash and Rickter. Includes 3M™ self adhesive backing for easy installation. There is 10" of extra material on a '21+ Krash Footrocket. |
||||
Read the notes to the right. |
Scupper Valve Fits Krash hulls where the drain exits the rear This may or may not work for those that exit in the pump area. We have not tested it there. To install, remove the three small allen screws at the top of the drain cover, Cut away the adhesive in the crack with a razor blade then heat up and pry out with a tire iron. Some take a lot of force to break the sealant lose. This scupper will not work on the 2021 1200s with the 4 bolt scupper cover. We are working on one for the '21s |
||||
|
Replacement drain plug for pre '21 models |
||||
|
Replacement drain plug assembly |
||||
 Short Battery Strap $27.95 |
Short Battery Strap for smaller batteries like the lithium ion above. |
||||
|
Stock Krash Battery Strap $23.95 |
Stock Krash Battery Strap |
||||
|
Stock Krash Fuel Tank Strap $23.95 |
Stock Krash Fuel Tank Strap |
||||
|
Stock Krash Water Box Strap $23.95 |
Stock Krash Water Box Strap |
||||
 Krash Stock Handle Pole Pad $40 |
Stock Handle Pole Pad These have PSA = Peel and Stick Adhesive Average height is 3" Predator RR is sloped but an average of 1.5" Video here |
||||
 Hydro Turf or Jettrim Handle Pole Pad $20-30 |
Hydro Turf Handle Pole Pad A slot will need to be cut for the hood strap. Hydro-Turf Mounting Blocks can be used for a variety of applications including: handle pole pads / lifters, footholds and mounting exhausts. Blocks are 4.7″ x 5.1″. Comes with 3M self-adhesive. Available in 2" or 4" PSA = Peel and Stick Adhesive |
||||
 Handle Pole Bracket #28 only $165 |
Handle Pole Bracket A stock bracket. Special order only. If you need the base or any other parts please contact us. |
||||
 Clear Vinyl Hood Protectors $8 |
Clear Vinyl Hood Protectors 2-3 mil clear vinyl 3 piece set |
||||
 Foot hold insert nut $4.30 each |
Foot hold insert nuts square nut measure 12mm wide x 5mm thick. square will work with Reaper rounded nut measure 16mm wide x 7mm thick. |
||||
 Yamaha Engine Mounting Plates $215 set If you have a 2020 send your HIN# |
Yamaha Engine Mounting Plates Fixing Holes are drilled and counter-sunk, Engine Mount Holes are not drilled or tapped. |
||||
 H2o Elemental Covers $427 |
H2o Elemental Covers Gray/Black, Gray or Black in color color of building materials sometimes change |
||||
| Krash Main Page | Tech Support & Resources | ||||
